BlinkerSign®/BlinkerBeacon® (Used in all Options) • Installs easily onto most new or existing sign post or poles • Can be integrated into an ITS (Intelligent Transportation System) • Day-Viz® daylight visible high intensity LEDs are highly visible in bright daylight, fog, rain, and snow Sign Specifications Sign Substrate Reflective Sheeting .080 Highway Grade Aluminum 3M™ DG3 - with anti-graffiti overlay MUTCD MUTCD Section 2A.07 Compliant Compliance Warranty 3 Years Time Clock Controller and Scheduling Software (Used in Option 2) Hardware Time Clock Controller This hardware controller is integrated into TAPCO BlinkerSign® LED signs and stores the schedule uploaded from the included Scheduling Software. In turn, the controller activates the BlinkerSign® according to the stored schedule. To configure or alter scheduling for a BlinkerSign®, simply connect a laptop (not included) running the Scheduling Software to the ITS Time Clock Controller via a USB cable (included). The schedule is uploaded to the time clock controller/BlinkerSign® and can also be saved to the laptop for updating or use in other ITS devices. Benefits • Can be scheduled for late night hours, bar time, when accidents occur • Dusk till dawn option also available BlinkerBeam® Wireless Communication (Used in Option 3, 4, & 5) Wrong Way BlinkerSign® Warning Systems typically consist of two Wrong Way signs (1 & 2) one on each side of the roadway. When activated, the signs communicate wirelessly with each other through the BlinkerBeam® transmitter 3. Instantly both signs are flashing in unison. • Operates license-free on 902-928 MHz Spread Spectrum • Stand-alone operation • Solar Powered or 110 VAC operation • Fully programmable outputs • Range up to 900 feet with internal antenna, optional antenna for extended distance Radar Detection & Dispatch Alert (Single Radar used in Option 3, Dual Radar in Options 4 & 5) Single Radar Features • Sign flashes only when vehicles are present • Fully configurable via RS232 serial port • Wide input operating range & low power allows solar operation • Weatherproof enclosure option Dual Radar Features • Includes all same features as single radar • Confirms wrong way driver • Will trigger Email/SMS alert to dispatch Confirmation Camera (Used in Option 5) • HDTV 720p • Images sent to server • Power over Ethernet • Video motion detection Camera Specifications Image sensor Lens Light sensitivity 1/4" progressive scan RGB CMOS 2.8mm 81" view, f2.0, fixed iris, fixed focus 1.0 - 10000 lux Shutter time 1/6 s to 1/ 24500 s Resolutions 1280x720 to 320 x 180 Frame rate 25 fps @ 50Hz and 30 fps @ 60Hz Casing Memory IP66 Nema 4x-rated metal casing (aluminum) 256 MB RAM, 128 MB Flash Power 8-28V DC max 4.7 W BlinkLink™ Web-based Traffic Device Monitor & Control (Option 4 & 5) Real-time map based location monitoring shows the status of all web enabled Wrong Way devices. The activation of a device triggers a visual and audible notification on the BlinkLink™ portal. Additional notifications are sent via email and SMS text messaging so that the right people get notified no matter where they are. Within seconds after a notification is received, a series of images are sent to the BlinkLink™ system and can be viewed to show the event as it happened for visual verification and identification of the Wrong Way incident. • Logs of the events are kept and can be exported. • User accountability and access controls enable the customer to track who can do what, and when they did it. • Notification logs also verify that notifications are being sent out and to whom they have been sent out to.